86-27-81802833
No. 770, Gehong Road, Gedian Development Zone, Ezhou, Hubei, China (Mainland)
low cost prefabricated modular eps sandwich panel house
Description: Sandwich Panel (FPB) is a weight energy saving wall material and it is made from the calcium silicon board (fiber cement board), cement and EPS polystyrene foam particles. It can be widely applied to all kinds of buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement hall, residence house renovation and so on.
Composition: Calcium silicate board (face panel) + Cement and EPS (core) + Calcium silicate board (face panel)
Product characteristics of EPS& Cement Sandwich Panel:
1. Energy--saving, environment-friendly
2. Fire proof
3. Help to increase the usable area of the building
4.Anti-pressure, anti-seismic and anti-impact
5.water and wet proof
6. Sound insulation
7. Simple construction and high efficiency
8. Heat preservation
9. Spiking and stickability
10.Lightweight and cheap
11.Can be recycled
Technical performance Indicators:
NO. | Items | National Standards | Testing Results | ||||||||
| 60mm | 90mm | 120mm | 150mm | 180mm | 60mm | 90mm | 120mm | 150mm | 180mm | ||
| 1 | Anti-impact Capacity/times | ≥5 | ≥5 | ≥5 | ≥5 | ≥5 | ≥8 | ≥10 | ≥15 | ≥18 | ≥22 |
| 2 | Anti-bending damage load/times over deadweight | ≥1.5 | ≥1.5 | ≥1.5 | ≥1.5 | ≥1.5 | ≥3 | ≥4 | ≥5 | ≥6 | ≥7 |
| 3 | Anti-pressure strength/Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| 4 | Surface density kg/m2 | ≤70 | ≤90 | ≤110 | ≤55 | ≤70 | ≤85 | ≤102 | ≤117 | ||
| 5 | Single point hanging strength/N | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1000 | ≥1200 | ≥1300 | ≥1400 | ≥1500 |
| 6 | Fireproof limit/h | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 | ≥3 | ≥3 | ≥4 | ≥4 | ≥4 |
| 7 | Sound insulation capacity in the air/db | ≥30 | ≥35 | ≥40 | ≥45 | ≥50 | ≥35 | ≥40 | ≥45 | ≥50 | ≥55 |
| 8 | Soften coefficient | ≥0.80 | ≥0.80 | ≥0.80 | ≥0.80 | ≥0.80 | ≥1 | ≥1 | ≥1 | ≥1 | ≥1 |
| 9 | Moisture rate a/% | ≤12 | ≤10 | ≤10 | ≤8 | ≤8 | ≤10 | ≤9 | ≤7 | ≤6 | ≤6 |
| 10 | Heat transfer coefficient w/m2.k | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤1.0 | ≤1 | ≤0.6 | ≤0.5 | ≤0.4 | ≤0.3 |
| 12 | Drying shrinkage value /mm/m | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.4 | ≤.0.5 | ≤0.5 | ≤0.5 | ≤0.5 |
| 13 | Inner radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 14 | Outer radiation index | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| 15 | Radioactivity Limit | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Foreign engineering case
Certificates
Free samples could be provided!
